Save big when you bundle the WesAudio Dione module with the Titan rack!
You Will Receive
- WesAudio Titan Rack (1)
- WesAudio Phoebe (1)
WesAudio Phoebe Description
Class A microphone preamplifier with digital recall. Features +28dbu headroom and dual Carnhill amp topology. Front panel TRS/XLR socket which supports HiZ instruments. Total recall and plugin control compatible with all DAWs.
Features
- 100% analog microphone/line preamp with +28dBu of headroom.
- Class A fully analog - inspired by famous 1073 design based on
- dual amp topology.
- Microphone gain up to 75dB.
- Carnhill Transformers (input and output).
- Output signal metering on the front panel with clip detection.
- Phantom power and phase invert control.
- Switchable impedance input (1200/300Ohm).
- All controls/analog settings are fully manageable via the
- WesAudio GCon DAW plug-in.
- IRON PAD - passive output attenuation circuit with 1 dB step
- (after the output transformer).
- Front panel XLR/TRS socket which supports - HiZ instrument input
- (TRS), line input (XLR), microphone input (XLR).
- Recallable signal source to be either back XLR Socket, or front panel
- XLR/TRS socket.
- 500 series and ng500 (e.g. _TITAN) series compatible.
- Total Recall and plugin control compatible with most DAWs.
- Analog automation in DAW
Specifications
- Line input impedance: 5.5k ohm bridging.
- Noise: unity gain (better than -100dbU) Max gain +75dB
- (better than -70dbU).
- EIN: better than -120dB.
- Freq response: +/- 0.5dB 20Hz-20kHz; -3dB at 50kHz.
- Distortion: 0.005% at 1kHz at +20dBu output.
- Max power consumption: 170mA(+16V); 100mA(-16V)
WesAudio Titan 500 Series Rack Description
_TITAN is complete recall system designed to provide total integration with your beloved analogue equipment. It implements special connector which is part of new open standard “ng500” – “Next Generation 500 series” where modules can be designed to communicate with outside environment to support digital recall or any other vendor specific functionalities. “ng500” connector is compatible with most of standard 500 series modules* and allows total integration with GCon compatible modules. _TITAN supports USB connection, which can be used to directly connect workstation to your modules, and Ethernet connection where modules can be accessed through LAN network (currently only one subnet is supported). Documentation along with dedicated software framework (including high level API and firmware drivers) will be part of GCon open specification(**) and each vendor can acquire it for free.
Features
- GCon compatible frame which allows to commnicate with modules through single connection.
- USB connection to manage up to 10 modules.
- Ethernet connection (UDP based) to manage up to 10 modules (LAN single subnet).
- GConManager application which allows to manage stereo links.
- Internal audio signals are routed into special connector (I.A.C. “Internal Audio Connector”) accessible on 10th slot, which allows integration with “Summing Modules” or “Audio interfaces”.
- Stereo links are integrated with modules, and pressing “Link” button on modules which supports GCon protocol (e.g. _Mimas) sets stereo link on the _Titan.
- Open Specification – documentation and software framework including communication drivers for any Vendor that would like to adopt to this standard.
- 10 slots with ng500 series connector.
- Remote firmware upgrade – _Titan & all modules inside can be upgraded remotely through USB or Ethernet connection.
- XLR sockets in/out for each slot.
- Internal stereo link switches which can be also managed through GConManager standalone application.
- Linear power supply capable to deliver 5A of power.
- Power mode switch – 115V/230V.
