Neumann is excited to introduce its latest innovation, the KH 120, representing the first product in the new line of Neumann Studio Monitors.
The KH 120 A studio monitor is designed for use as a near-field loudspeaker or as a rear loudspeaker in larger multi-channel systems. The KH 120 A represents the latest in acoustic and electronic simulation and measurement technologies to ensure the most accurate sound reproduction possible. It has a Mathematically Modeled Dispersion waveguide (MMD (TM), flexible acoustical controls, analog class-AB amplifiers, a large headroom analog input and an extensive mounting hardware range. All of this provides the user with the maximum versatility over a wide variety of acoustic conditions, source equipment, and physical locations.
The KH 120 is perfect for tracking, mixing and mastering in music, broadcast, project and post-production studios.
Acoustics
- -3 dB free field frequency response 52 Hz … 21 kHz, ± 3 dB
- Pass band free field frequency response 54 Hz … 20 kHz, ± 2 dB
- Self-generated noise
- (with input gain set to 100 dB for 0 dBu) <20 dB(A) at 10 cm
- Sine wave output with a THD < 0.5 % at 1 m 95 dB SPL (>100 Hz)
- Max. SPL In half space at 3% THD at 1m 111.1 dB SPL
- (averaged between 100 Hz and 6 kHz)
Electronics
- Woofer amplifier, cont.(peak) output power* 50 W (80 W)
- Tweeter amplifier, cont.(peak) output power* 50 W (80 W)
- Controller design Analog, active
- Crossover Frequency 2.0 kHz
- Crossover Slope (dB/oct.) 24, 4th order
- Equalization - Bass 0, -2.5, -5, -7.5 dB
- Equalization - Mid 0, -1.5, -3, -4.5 dB
- Equalization - High +1, 0, -1, -2 dB
- Protection circuitry Limiter: low, high
- Infrasonic filter frequency; slope 30 Hz; 6 dB/oct.
- Analog Input
- Impedance, electrically balanced XLR, >10 kΩ
- Input gain control (sensitivity) 0 dBu to -15 dBu
- Output level control 94, 100, 108, 114 dB SPL
- CMRR >56 dB @ 15 kHz
Displays and Mains Power
- Displays and indicators - power on Neumann logo “White”
- Displays and indicators - limit/clip Neumann logo “Red”
- Mains Power Supply, voltage; frequency 100-240 V~; 50/60 Hz
- Power consumption – Idle 20 W
- Power consumption – Full output AC 200 W
Mechanics
- Cabinet surface finish, color: custom Painted aluminium, Anthracite (RAL 7021)
- Operating conditions +10° C to +40° C (+50° F to +104° F),
- <90% RH, non-condensing
- Transport/storage conditions −25° C to +70° C (−13° F to 158° F),
- <90% RH, non-condensing
- Drivers Magnetically shielded
- Woofer 130 mm (5.25”)
- Tweeter 25 mm (1”)
- Mounting points 2 x M8 on rear panel
- Height x width x depth, mm (inches) 277 x 182 x 220 mm (10 7/8” x 7 1/8” x 8 5/8”)
- Internal net volume / external volume 6.5 liters / 9.7 liters
- Weight 6.2 kg (13.7 lbs)
